Der Trinnov Altitude Thread

  • Ich kann Markus auch mit gutem Gewissen empfehlen, meiner Meinung nach auch einer der wenigen die sich sehr gut mit Trinnov auskennen und das auch vermitteln können.


    John Buckner, Glückwunsch zu dem schönen Weihnachtsgeschenk, willst du uns auch verraten was besser geworden ist?

    Oder was ihr noch eingestellt habt und was das für eine veränderung brachte.

    Wohl wissend das es nicht unbendingt auf andere Räume anwendbar ist

    PEQ's für die Subs oder anpassungen von aktiv Weichen?

  • Ja, ist ja schon seit einiger Zeit eines der lang angekündigten neuen Features. Zieht sich leider etwas...

    Da Storm Audio als einer der Hauptkonkurrenten mit DIRAC ART einen Wettbewerbsvorteil hat wird das bei Trinnov hoffentlich die entsprechende Prio bekommen.

    Auch für DBA Nutzer wäre das ein interessantes Feature sofern es so wie bei DIRAC ebenfalls bis 150 Hz "wirkt".

  • Da Storm Audio als einer der Hauptkonkurrenten mit DIRAC ART einen Wettbewerbsvorteil hat wird das bei Trinnov hoffentlich die entsprechende Prio bekommen.

    Na auch AoIP ist ein Feature das beim Mitbewerb mittlerweile nichts besonderes mehr ist und auf das man bei Trinnov nach wie vor wartet.

    Auch ein Update des DSU (Dolby Surround Upmixer) lässt nach wie vor auf sich warten.

    So langsam muss Trinnov IMHO tatsächlich mal nachlegen um seine Führungsposition zu behaupten...

  • Was sind da die ausstehenden Verbesserungen?

    Mal überlegen ob ich das noch zus.kriege.
    Der neue Upmixer soll wohl alle 34 Positionen der Dolby Atmos Spezifikation unterstützen - insbesondere wohl die Front-Wides, die bisher vom DSU nicht angesprochen werden.

    Zudem sollen die Algorithmen überarbeitet worden sein, mit Verbesserungen wohl insbesondere bei 2-Kanal-Content, was ihn wohl insbesondere für Musik interessanter macht, als bisher.

  • Stormaudio hat auf der CEDIA eine Vorstufe in der Version mit nur digitalen Ausgängen präsentiert, ich hoffe dann bietet sich mal eine Alternative zur Trinnov, würde dem Preisniveau bestimmt mal guttun. Mit Dirac ART vielleicht auch dann nah genug dran.

  • So wie es sich anhört wird bereits in drei Wochen auf der ISE etwas Spannendes vorgestellt:


    "Trinnov Audio will demonstrate its new groundbreaking acoustic processing technology, based on years of research, at ISE 2023 (booth 2D150). In partnership with Krix, Sony & Officina Acustica, this new digital sound field control system makes its debut in an active 13.16.6 channel home cinema system. Integrated Systems Europe, ISE 2023, will take place at the Fira Barcelona Gran Via, 31 January - 3 February 2023."


    und


    "For more than 15 years, Trinnov’s Optimizer has been recognized as the best-in-class loudspeaker/room optimization technology by the most demanding experts across multiple markets, from studios to commercial cinemas and home theaters. The Optimizer’s purpose is to improve the sound reproduction of any loudspeaker in any given acoustic environment. With this major evolution and addition to the Optimizer, we rely even more dramatically on the very fundamental aspects of acoustics and physics.

    In its first iteration, this new algorithm uses subwoofer arrays and sophisticated processing to control the acoustics of the room. 20 years after Trinnov’s original breakthrough research work, the French innovators return to their deepest roots and mission of innovating in acoustic field processing. With this break-through, one can truly start talking about Active Acoustics.

    “We started research on this very ambitious technology more than 6 years ago. At ISE, we will be demonstrating the technology in an uncompromised environment, delivering the highest possible performance generally expected from Trinnov. Although the technology is fully functional, we will first roll it out selectively, based on specific projects, before offering the finalized software as a complimentary upgrade to Altitude16 and Altitude32 owners. We have reached a point where we believe this new technology has the potential to redefine home theater design. It may well set a new standard, and replace today’s best practices.” added Laborie.

    Provided that the minimum required conditions are met, Trinnov claims this innovation can “make the room disappear”.

    “Traditionally, low frequency reproduction is handled through a modal analysis where resonances are identified in the frequency domain. Through our extensive research and unique expertise in 3D acoustic fields, we propose something different. Our disruptive approach seeks to fully understand and control the behavior of the room in all its dimensions (time, frequency and the 3 dimensions of space) so that resonances are removed almost entirely and without artifacts. The initial wavefront produced by the subwoofers propagates through the room unaltered and pure, as if there were no walls.“"

  • Nachdem einige Jahre nichts mehr bahnbrechendes von Trinnov und anderen Herstellern kam, freue ich mich auch auf das neue Update. Gerade im Bass gibt es tatsächlich noch Optimierungspotential.


    Dass das Upgrade kostenlos kommen wird, bestätigt mich in der damaligen Entscheidung, ein teures Gerät zu kaufen in der Hoffnung, dass es up to date bleibt.


    Also rundweg gute Nachrichten. Falls dann noch das neue HDMI-Board kommt und ich dann endlich Auto Lipsync nutzen kann, zusammen mit dem Check Up und der Garantieverlängerung nach 5 Jahren, dann habe ich eine topaktuelle Altitude, und das sechs jahre nach Kauf. Das ist zumindest meine Hoffnung für 2023. 🙂


    Schon irre, wie sehr sich die Altitude durchgesetzt hat. Vor so 5-6 Jahren war ich noch der erste Altitude-Besitzer im anderen Forum. Und jetzt tummeln sich diverse A16 und A32 hier.

  • Ist das jetzt rein das geteaste wie von DIRAC oder wird hier tatsächlich auch Spekulation offen gehalten, dass Trinnov ein DBA ausmisst/einstellt?

    Also wenn ich mir die Zeichnungen des ISE Demo-Kinos so anschaue, dann sieht mir das nach einem lupenreinen 8+8 DBA aus. Hoffen wir mal, dass da letztlich nicht nur eine automatische DBA-Einmessung bei raus kommt. :zwinker2:
    Ein findiger Marketeer könnte ein DBA durchaus so beschreiben wie in obigem Text:
    "In its first iteration, this new algorithm uses subwoofer arrays and sophisticated processing to control the acoustics of the room. [...] With this break-through, one can truly start talking about Active Acoustics." :big_smile:

  • Also wenn ich mir die Zeichnungen des ISE Demo-Kinos so anschaue, dann sieht mir das nach einem lupenreinen 8+8 DBA aus. Hoffen wir mal, dass da letztlich nicht nur eine automatische DBA-Einmessung bei raus kommt. :zwinker2:
    Ein findiger Marketeer könnte ein DBA durchaus so beschreiben wie in obigem Text:
    "In its first iteration, this new algorithm uses subwoofer arrays and sophisticated processing to control the acoustics of the room. [...] With this break-through, one can truly start talking about Active Acoustics." :big_smile:

    Steht im Text, dass da ein DBA installiert ist.

  • Klingt spannend!


    Plant jemand die ISE zu besuchen und könnte hier persönliche Eindrücke von der Trinnov Präsentation schildern?


    Ich bin auch auf der ISE - sehe David aber schon übermorgen persönlich und frag ihn dann mal, ob man schon etwas zum neuen Update sagen darf und was man veröffentlichen darf .

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!